HW-G7, 15hp, for 380v, three phrase, 4 square plate, 12 pcs of diamond tools. When the motor runs in low speed, the transmission devices enhances the torque of rotating shaft, which improves the grinding and polishing effect in different floors. The motor direct coupling the gear box to decrease the machine vibration.
Application:
Grinding and polishing floors of concrete, stone, terrazzo, epoxy and etc.
Removing painting, coating, epoxy and glue.
Old Floor removal, restoration, renovation, etc.
Parameters:
| Voltage | 220-240V ,1P/3phrase | 380V-440V, 3phrase |
| Frequency | 50/60HZ | 50/60HZ |
| Current | 26.7A | 15.5A |
| Power Output | 10hp(7.5KW) | 10hp(7.5KW) |
| Inverter power | 10hp(7.5KW) | 10hp(7.5KW) |
| Motor speed | 300-1800rpm | 300-1800rpm |
| Grinding width | 650mm | 650mm |
| Disc Dianeter | 250mm*4plate | 250mm*4plate |
| N.W | 270KG | 270KG |
| Water Tank | 30L | 30L |
| Dimension | 970*650*950mm | 970*650*950mm |
Features
Folding design, easy to pack and move;
Integrated central control panel;
Dual rear wheel design, affords more weight;
Four disc square plates, offering high performance and efficiency
Product Details
1,Using a stable transmission device. the front fuselage is connected to gear box directly, sothe motor power can be 100% transmitted When motor runs in low speed, the transmissiondevice enhances the torque cf the rotating shaft.which improves the grinding and polishing effect in different floors. Hgh strength aluminum alloy(gear box, solid, strong, good for heat radiation)
2,High strength aluminum alloy (gear box, solid strong, good for heat radiation)When the gears work for a few hours the enclosed gear box will be get pressed and hot. The aluminumalloy is good for hard radiation
3,Motor and gear box are directly connected reducing the machine’ s vibration, noise, at the same time, increases the flatness after grinding
4,Working area now is 600MM, the similar products in the market are commonly 580mm Wider grinding area increased productivity while also saving labor cost.
Product Details
HW-G7 is a square design concrete grinding machineIt is driven by gears and has four grinding plates. Thegrinding plates counter rotates, but would not leavetrace on floor. 600mm grinding width is wider than580mm which is common in the market
Application
For coarse grinding, medium grinding, fine polishing.crystallizing, preparation, maintenance of all kinds offloor. Remove painting, coating, epoxy, urethane, gluepolyurethane, mastic with PCD tools on all kinds of floor
Closer Look
Production Flow
Company introduction
Changsha Honway Machinery Co., Ltd is the Professional manufacturer for floor scarifying & grinding & polishing machine in China.
1, Well equipped facilities for mechanical process.
2, Strict quality control throughout the stages of production.
3, A team of experienced technicians and workers.
4, All products are CE certified, comply with international standard.
5, Covering a production area of 1000 square meter.
After Sell Service
- One year of warranty for machine.
- Honway always store the spare parts of old models, in case that the machine needs repair in future.
- The spare parts can be sent out immediately at any time, delivered by DHL.
- Honway will service you and your machines for years.
- All gear boxes are tested 48 hours before it leaves factory.
- If the customers visit our factory, we could provide the training lessons.
- We always supply the spare parts for all the old models.
FAQ
Q: If your machine can be customized?
A: Yes, we can design and produce according to client’s requirements.
Q: What is your payment method?
A: 100% or 50% T/T advance, the balance should be paid before shipment. (for old customers, we could discuss again)
Q: How about your delivery time?
A: 7~20 days (according to the order quantity)
